On July 26, 2022, the drying and dust removal system for fertilizer processing equipment system customized by Sri Lankan customers was finished and delivered. The main equipment of this batch of equipment is mainly dryer and cyclone dust removal equipment package. This system is used to expand the demand of Sri Lankan customers’ fertilizer production line project in the early stage to expand production capacity. At the same time, the expansion equipment of the production line includes the equipment that has been shipped successively before: organic-inorganic combined granulator, crusher, mixer, conveyor, etc. The equipment delivered this time is mainly used for the dust purification treatment of material drying and production required for increasing production capacity.
Characteristics of fertilizer dryerThe rotation speed of the drum and the crushing device can be adjusted and can operate continuously.Flow and sealed drying process are adopted to reduce energy consumption.Less faults, low maintenance cost and low power consumption.While drying, it can also achieve the purpose of sterilization and odor removal.
Because most of the dust particles generated in the current working process of customers are greater than 8μm . Based on this kind of dust collector, for 5μm above particles have the characteristics of high dust removal efficiency and fast sedimentation, so this dust collector is selectedThe products delivered this time are specially equipped with a processing cyclone in order to solve the pollution source – exhaust gas and dust – produced by the customer’s materials in the drying process.With the help of centrifugal force, the dust particles are separated from the air flow and attached to the surface of the inner cavity, and then fall into the ash hopper with the help of gravity. Each component of the cyclone has a certain size proportion, and each change in the proportion relationship can affect the efficiency and pressure loss of the cyclone, in which the diameter of the dust collector, the size of the air inlet and the diameter of the exhaust pipe are the main influencing factors. Pay attention to the size of gas discharge when using.
Post time: Aug-08-2022