Last week, we sent a potash fertilizer production line to Paraguay. This is the first time that this customer has cooperated with us. Previously, due to the epidemic situation and shipping costs, the customer has not arranged for us to deliver the goods. Recently, the customer saw that the shipping fee has fluctuated and asked us to deliver the goods. We sorted out the goods and arranged for delivery to the customer. At the very beginning, the client didn’t trust us very much, and thought it was a big investment. They wanted to visit our site before making a decision. However, due to the epidemic, the client could not visit our factory. We contacted the client in Brazil. , invite the Paraguay customer to Brazil to visit the customer’s factory and production. After seeing our factory in Brazil, customers are very confident in our products and place an order for us.
What are the characteristics of potash fertilizer granulation production line?
1. The dry powder is directly granulated without any binder;
2. The strength of the particles can be directly adjusted, and the strength of the particles can be controlled by adjusting the pressure of the rollers.
3. The product is sand-like irregular particles.
4. Continuous production, large production capacity, high degree of automation, suitable for industrial production.
5. Low cost of granulation.
What are the applications of potash fertilizer production line?
Except for the dangerous goods that can cause explosion due to extrusion friction, this unit can directly granulate most dry powder materials. The rolls are water-cooled through the rotary joint, and the unit can also granulate heat-sensitive materials.
In order to make the powder evenly distributed over the entire width of the roll and improve the working capacity of the equipment, vertical feeding is adopted for units with a roll width of less than 120 mm, and horizontal twin-screw feeding is used for units with a roll width of 160 mm or more.
What is the working principle of potash fertilizer granulator?
The powdery material is sent laterally from the vibrating hopper to the main feeder through the quantitative feeder, degassed under the action of the stirring screw of the main feeder, and is pre-pressed and pushed into the arc-shaped grooves of the two rollers arranged on the left and right. A pair of intermeshing gears are driven by a pair of gears to rotate in the opposite direction at a constant speed. The powder is rolled into a dense sheet at the moment of passing through the roller. Scrape down, the strip grooves evenly distributed on the surface of the two rolls prevent the powder from slipping when bitten by the rolls. After the pellets fall into the crushing and granulating machine for granulation, they are sieved and classified by a vibrating screen to obtain granular products that meet the requirements.
Post time: Aug-08-2022